ナノ製造技術の探索と展開
研究成果
TOP研究成果 > 柳下 崇

研究成果
一期生 二期生 三期生
赤松 謙祐 斎藤 毅 内藤 泰久 平塚 祐一 前田 優
松井 淳 丸尾 昭二 三村 秀和 柳下 崇

柳下 崇

論文
  • T. Yanagishita, R. Fujimura, K. Nishio, and H. Masuda,
    Fabrication of Monodisperse Polymer Nanoparticles by Membrane Emulsification Using Ordered Anodic Porous Alumina,
    Langmuir, 26, 1516 (2010).
  • T. Yanagishita, R. Fujimura, K. Nishio, and H. Masuda,
    Preparation of Uniform-sized Polymer Nanofibers by Extrusive Spinning Using Ordered Anodic Porous Alumina, Chem. Lett. 39, 188 (2010).
  • M. Harada, T. Kondo, T. Yanagishita, K. Nishio, and H. Masda,
    Anodic Porous Alumina Masks with Checkerboard Pattern,
    Appl. Phys. Express, 3, 015001 (2010).
  • T. Yanagishita, E. Endo, Y. Yamaguchi, K. Nishio, and H. Masuda,
    Ordered Pillar Array Structures of TiO2 by Nanoimprinting Using Anodic Porous Alumina as Mold,
    Chem. Lett., 38, 274 (2009).
  • T. Yanagishita, K. Nishio, and H. Masuda,
    Anti-Reflection Structures on Lenses by Nanoimprinting Using Ordered Anodic Porous Alumina,
    Appl. Phys. Express, 2, 022001 (2009).
  • T. Yanagishita, T. Kondo, K. Nishio, and H. Masuda,
    Optimization of AR structures of Polymre Based on Nanoimprinting Using Anodic Porous Alumina,
    J. Vac. Sci. Technol. B, 26, 1856 (2008).
  • T. Yanagishita, S. Kimura, K. Nishio, and H. Masuda,
    Fabrication of Hollow Spheres with Porous Structures by Anodization of Small Al Particles,
    Appl. Phys. Express, 1, 084001 (2008).
  • T. Yanagishita, K. Nishio, and H. Masuda,
    Antireflection Polymer Hole Array Structures by Imprinting Using Metal Molds from Anodic Porous Alumina,
    Appl. Phys. Express, 1, 067004 (2008).
  • T. Yanagishita, K. Nishio, and H. Masuda,
    Two Dimensional Photonic Crystal Composed of Ordered Polymer Nanopillar Arrays with High Aspect Ratios Using Anodic Porous Alumina Templates,
    Appl. Phys. Express, 1, 012002 (2008).
  • K. Nishio, T. Yanagishita, S. Hatakeyama, M. Maekawa, and H. Masuda,
    Fabrication of Ideally Ordered Anodic Porous Alumina with Large Area by Vacuum Deposition of Al onto Mold,
    J. Vac. Sci. tech. B, 26, L10 (2008).
  • T. Yanagishita, k. Yasui, T. Kondo, Y. Kawamoto, K. Nishio, and H. Masuda,
    Antireflection Polymer Surface Using Anodic Porous Alumina Molds with Tapered Holes,
    Chem. Lett., 36, 530 (2007).
  • T. Yanagishita, N. Kumagai, K. Nishio, and H. Masuda,
    Nanoimprinting Using Highly Ordered Anodic Porous Alumina with Reduced Hole Periods,
    J. Photopolymer. Sci. Tech., 20, 569 (2007).
  • T. Yanagishita, K. Nishio, and H. Masuda,
    Polymer Through-hole Membrane Fabricated by Nanoimprinting Using metal Molds with High Aspect Ratios,
    J. Vac. Sci. Technol. B, 25, L35 (2007).
  • T. Yanagishita, K. Nishio and H. Masuda,
    Polymer Thgough-hole Membranes with High Aspect Ratios form Anodic Porous Alumina Templates,
    Jpn. J. Appl. Phys., 45, L1133 (2007).
  • 15. Y. Wada, T. Yanagishita, and H. Masuda,
    Ordered Porous Alumina Geometries and Surface Metals for Surface-Assisted Laser Desorption/Ionization of Biomolecules: Possible Mechanistic Implications of Metal Surface Melting,,
    Anal. Chem., 79, 9122 (2007).
  • M. Harada, S. Murata, T. Yanagishita, H. Sugimura, K. Nishio, H. Masuda,
    Patterning of Self-Assembled Thin Films Using VUV Irradiation through Anodic Porous,
    Chem. Lett., 36, 1266 (2007).
  • T. Yanagishita, K. Nishio and H. Masuda,
    Nanoimprinting Using Ni Molds Prepared from Highly Ordered Anodic Porous Alumina Templates,
    Jpn. J. Appl. Phys., 45, L804 (2006).
  • T. Yanagishita, K. Nishio, and H. Masuda,
    Polymer Thgough-hole Membranes with High Aspect Ratios form Anodic Porous Alumina Templates,
    Jpn. J. Appl. Phys., 45, L1133-L1135 (2006).
国際会議発表
  • T. Yanagishita, R. Fujimura, K. Nishio, and H. Masuda,
    Preparation of monodisperse nanoparticles by membrane emulsification using anodic porous alumina,
    2007 MRS fall meeting, 2007年11月,Boston
  • T. Yanagishita, Y. Maejima, K. Nishio, and H. Masuda,
    Preparation of monodisperse nanoparticles by membrane emulsification using highly ordered anodic porous alumina,
    2009 MRS fall meeting, 2007年11月,Boston
特許
  • 発明者:益田秀樹,柳下 崇,藤村涼子,西尾和之
    発明の名称:膜乳化法により形成される単分散エマルションおよびその製造方法ならびにその方法を用いたポリマー微粒子およびコンポジット粒子の製造方法
    出願人:(財)神奈川科学技術アカデミー,(独)科学技術振興機構
    出願日:平成20年2月1日
  • 発明者:益田秀樹,柳下 崇,藤村涼子,西尾和之
    発明の名称:凝集粒子の製造方法
    出願人:(財)神奈川科学技術アカデミー,(独)科学技術振興機構
    出願日:平成20年2月1日
  • 発明者:益田秀樹,柳下 崇,藤村涼子
    発明の名称:ファイバー状構造体及びその製造方法
    出願人:(財)神奈川科学技術アカデミー,(独)科学技術振興機構
    出願日:平成20年2月1日
Copyright c Search for nanomanufacturing technology and its development
科学技術振興機構ホーム TOPページ